Article number: 30730-14 |
|
- for working with voltages of up to 1.000V
- protective insulation according to DIN ISO EN 60900
|
Article number: 30730-15 |
|
- for working with voltages of up to 1.000V
- protective insulation according to DIN ISO EN 60900
|
Article number: 30730-16 |
|
- for working with voltages of up to 1.000V
- protective insulation according to DIN ISO EN 60900
|
Article number: 30730-17 |
|
- for working with voltages of up to 1.000V
- protective insulation according to DIN ISO EN 60900
|
Article number: 30990 |
|
- with cross clamp cut for better grip
- for covering terminals, cable ends and single wires when working on electric and hybrid vehicles as well as various high voltage applications
- VDE certified, insulation according to DIN ISO EN 60900
|
Article number: 30992 |
|
- with cross clamp cut for better grip
- for covering terminals, cable ends and single wires when working on electric and hybrid vehicles as well as various high voltage applications
- VDE certified, insulation according to DIN ISO EN 60900
|
Article number: 30994 |
|
- with cross clamp cut for better grip
- for covering terminals, cable ends and single wires when working on electric and hybrid vehicles as well as various high voltage applications
- VDE certified, insulation according to DIN ISO EN 60900
|
Article number: 39680 |
|
- 11 hole saws with ø 12, 14, 16, 18, 20, 22, 24, 25, 26, 28 and 30 mm
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-12 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-14 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-16 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-18 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-20 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-22 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-24 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-25 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-26 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-28 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 39680-30 |
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
Article number: 37198Z |
|
|
Article number: 2031Z |
|
|
Article number: 4172Z |
|
- fine toothing enables smaller swivel angle than standard (72 teeth)
- ideal for working in very confined spaces
- SW8 + 9 mm with 90 teeth (4° swivel angle)
- SW10-19 mm with 120 teeth (3° swivel angle)
|
Article number: 4425Z |
|
|
Article number: 2018Z |
|
- freely rotating sleeve for fast working
- t-handle can be fixed in 3 positions
- extra slim design for narrow spaces
- in storage rack, suitable for wall mounting
|