Article number: 39680-12 |
Ø: 12 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
12 mm
|
cutting depth 25 mm
|
Article number: 39680-14 |
Ø: 14 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
14 mm
|
cutting depth 25 mm
|
Article number: 39680-16 |
Ø: 16 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
16 mm
|
cutting depth 25 mm
|
Article number: 39680-20 |
Ø: 20 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
20 mm
|
cutting depth 25 mm
|
Article number: 39680-22 |
Ø: 22 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
22 mm
|
cutting depth 25 mm
|
Article number: 39680-24 |
Ø: 24 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
24 mm
|
cutting depth 25 mm
|
Article number: 39680-25 |
Ø: 25 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
25 mm
|
cutting depth 25 mm
|
Article number: 39680-26 |
Ø: 26 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
26 mm
|
cutting depth 25 mm
|
Article number: 39680-28 |
Ø: 28 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
28 mm
|
cutting depth 25 mm
|
Article number: 39680-30 |
Ø: 30 mm, Description: cutting depth 25 mm
|
- for V2A, V4A (each up to 2 mm), steel, cast steel, non-ferrous metals, wood, plastic, plasterboard, aerated concrete, etc.
- the special design enables better guidance of the hole saw as well as fast and easy drilling
- the resulting lower cutting pressure prevents deformation of the material
- centre drill with 3-edged shank to prevent slipping in the drill chuck
- ejection spring for easy removal of the drill core
- for use in hand and stationary drilling machines
- maximum possible cutting depth: 25 mm (depending on material)
|
30 mm
|
cutting depth 25 mm
|