Article number: 2958 |
|
- softgrip for impact damping
- chrome-molybdenum steel
- pin punch with ø 8, 10, 12, 14, 16 mm, 180 mm long
- centre punch ø 2.5 x 10 mm, 4 x 10 mm, 8 x 12 mm, 185 mm long
- flat chisel 12 x 10 mm, 160 mm lang; 16 x 10 mm, 170 mm lang; 18 x 12 mm,
190 mm; 20 x 14 mm, 210 mm; 24 x 16 mm, 220 mm
|
Article number: 2959 |
|
- softgrip for impact damping
- in practical metal wall bracket
- chrome-molybdenum steel
- ø 3, 4, 5, 6, 7, 8 mm, 180 mm long
|
Article number: 2960 |
|
- softgrip for impact damping
- chrome-molybdenum steel
- pin punch with ø 3 - 4 - 5 - 6 - 7 - 8 mm, 180 mm long
- centre punch ø 4 x 10 mm, 185 mm long
- cross chisel 5 x 10 mm, 170 mm long
- flat chisel 16 x 10 mm, 170 mm long
- flat chisel 20 x 14 mm, 210 mm long
|
|
|
- Softgrip for impact damping
- chrome-molybdenum steel
|
|
|
- Softgrip for impact damping
- chrome-molybdenum steel
|
|
|
- Softgrip for impact damping
- chrome-molybdenum steel
|
|
|
- Softgrip for impact damping
- chrome-molybdenum steel
|
Article number: 223 |
|
- impact force adjustable by turning black handle
|
|
|
- letter style complies with DIN 1451, for hammering on steel and iron
|
|
|
- number style complies with DIN 1451, for hammering on steel and iron
|
Article number: 659 |
|
- supplied in plastic pouch, chrome-vanadium-steel
|
|
|
|
Article number: 4714 |
|
- designed to cut clean holes in all kinds of sealing materials, especially in the automotive sector, with spring-loaded centering pin
- 1 holder with protective grip
- 13 exchangeable punches
|
Article number: 4930 |
|
- interchangeable inserts, e.g. for mortising jobs, chrome-vanadium-steel
- 1 holder with quick release coupling and protective grip
- 7 flat chisels
- 1 cape chisel
- 2 taper punches
- 2 centre punches
- 2 pin punches
|
Article number: 2102 |
|
- oversized hexagon bits in 5.1, 6.1, 7.1 and 8.1 mm
- for worn-out screws:
Use hammer to punch oversized bit into screw head. Then use impact driver or 10 mm spanner for loosening. - conical shape for better fittting into screw head
- incl. impact driver for powerful loosening
- ideal for starter, brake caliper, brake disc, pulleys etc.
|
Article number: 222 |
|
|
Article number: 224 |
|
|
|
|
|
Article number: 115EX |
|
- 360° rotatable splitting pin
- forged
|
Article number: 5502 |
|
- common thread UN 1.1/2" x 16, can be combined with many pullers
- ideal substitute for hydraulic spindles when using a torch, because the torch can damage sealings of hydraulic spindle
- application: screw impact spindle into suitable yoke and tighten firmly with impact key; then hit spindle head with hammer to loosen tight connection
|