Article number: 2060 |
|
- to drill out tight or broken glow plugs
- for user-friendly, quick and cost-efficient repair jobs
- also suutable for ceramic glow plugs
- to drill out the glow plug, remove residues and cut new thread
- drills, sleeves, dies and extraction bolts specially designed for each glow plug sizes
- drills and dies in HSS-Co5 steel quality - for extra long durability
- specialist sockets for removing glow plug electrode
- striking weight for removing residues, with 2 sliding bars to select from depending on available work space
- universal set, suitable for almost all car manufacturers
|
Article number: 8820 |
|
- to extract carbonised or corroded glow plugs
- the impact wrench produces impact momentum in turning direction, acting like a hammer stroke on the screw connection; these strokes are executed over 50x per minute with max. 40 Nm (with 8 bar) in loosening mode, thus causing the corrosion and carbonisation to break open
- specially designed for Common-Rail diesel engines
- also suitable for spark plugs
- adjustable loosening torque in 4 modes: 10 Nm / 20 Nm / 30 Nm / 40 Nm
|
Article number: 2087 |
|
- to drill out damaged glow plug tips
- comprehensive set for the most popular glow plug sizes
- for glow plugs with thread M8x1.0, M10x1.0 and M10x1.25
- enables disassembly also in installed positions, therefore providing time and cost savings
- with 9 different pilot adapters for precise working
- extra long drills and thread cutters
- extraction adapters with ball bearing
- extra long extraction spindles
- extraction nuts with pilot cone
|
Article number: 2086 |
|
- extra long drill, accessory for No. 2087
|
Article number: 2088A |
|
- to drill out tight or broken glow plugs
- Repair system for broken glow plugs. User-friendly repair method provides a quick and cost-efficient solution to removal problems of new generation glow plugs. With this set all accessible glow plugs with thread M8x1 and M10x1 can be drilled out and the remains removed.
- for Audi, Seat, Skoda, VW, Mercedes, Opel, Peugeot, Renault etc.
|
Article number: 2089 |
|
- to drill out tight or broken glow plugs
- for Audi / VW 2.5, 2.7 and 3.0 L V6-TDI engines
- for drilling out glow plugs with M10x1.0 thread
- for rethreading or replacing glow plug thread
- repair is possible without cylinder head disassembly
- in VW Passat, Touareg and Phaeton
- in Audi A4, A6, A8 and Q7
- in Skoda Superb
|
Article number: 2099 |
|
- for pulling carbonised glow plugs with 10 mm hexagon drive
- simultaneous turn and pull movement extracts the glow plug - even if glow plug thread is already out of cylinder head
|
Article number: 2097 |
|
- e.g. for Mercedes-Benz CDI-engines
- for removing deposits in glow plug shafts
- for pulling out tight glow plugs
|
Article number: 2093 |
|
- for popular glow plugs in European cars
- for removing engine carbon deposits when changing glow plugs
- before using, put grease on reamers to ensure removed deposits stick to the reamer and do not fall into the combustion chamber
|
Article number: 2070 |
|
- for hard to reach glow plugs
- universally suitable for hard to reach areas
- for e.g. Audi, BMW, Mercedes, Peugeot, Renault, Seat, Skoda, Volkswagen
|
Article number: 2074 |
|
- for removing and fitting standard glow plugs and PSG glow plugs with the sensitive pressure sensor, e.g. VAG 03L905061D, Opel 1826354, GM 55564163 and 55577419
- incl. 5 contact cover caps for PSG glow plug connections to protect against dirt and anti-static charge
|
Article number: 2071 |
|
- with 5 contact cover caps to protect the sensitive pressure sensor
|
Article number: 2080 |
|
- for hard to reach glow plugs
|
Article number: 2085 |
|
|
Article number: 36171 |
|
- for professional replacement of the Teflon combustion chamber seal of the injector nozzle
- includes the necessary tools for removing, sliding on and compressing
Teflon sealing material expands when heated by engine temperature, providing an optimum fit and seal. The Teflon gasket at the tip of the injector must be replaced after the injector has been removed. According to the manufacturer‘s instructions, reuse is not permitted. The material also expands when applied to the tip of the injection nozzle and must be compressed accordingly.
|
|
|
- for popular glow plug connectors in European cars
|
|
|
- for hard to reach spark plug connectors
|
|
|
- for spark plug connectors with metal coating
- protects against damage to ignition cable
|
|
|
- for hard to reach glow plugs
|
|
|
|
|
|
|
Article number: 2084 |
|
- for deep-seated or extra long spark plugs
- suitable for BMW, Mercedes-Benz, Renault etc.
- with retaining spring for better grip
|
|
|
- to install and disengage spark plugs
- solid handle with rubber coating
- with ball joint
- with rubber insert
|
|
|
- to install and disengage spark plugs
- PVC-dipped t-handle
- with joint
|