Article number: 33201302 |
|
- for changing bearings on the front and rear axle without removing the axle. e.g. hydro bearing, plastic bearings, silent bearings, suspension joints, shock absorber rubber
- for bearing replacement on engine mounts, longitudinal and transverse control arms without removing the axle
- enables the use of Paschke thrust piece sets, wheel hub and bearing extraction sleeve, etc.
- saves up to 3 hours of time, as the axle parts do not have to be removed
|
Article number: 33202303 |
|
- for changing bearings on engine mounts, front and rear axle e.g. hydromounts, plastic mounts, silent mounts, suspension joints
- enables the use of Paschke thrust piece sets, bells, etc.
- trailing links, control arm, etc. no longer have to be removed, thus depending on the application up to 3 hours time saving
|
Article number: 32102504 |
|
- with thread and protective cap
- with 3/8" connection thread for coupling
- delivery without coupling and tension/compression bolt
|
Article number: 32102638 |
|
- cylinder side, with 3/8" NPT external thread
- e.g. for hydraulic cylinder 32102504
- for connection with hydraulic foot pump
- also suitable for Celette / Enerpac / Sun
|
Article number: 32102639 |
|
- hose side, with 3/8" NPT internal thread
- e.g. for hydraulic cylinder 32102504
- for connection with hydraulic foot pump
- also suitable for Celette / Enerpac / Sun
|
Article number: 32102649 |
|
- hose side, with 3/8" NPT internal thread
- e.g. for hydraulic cylinder 32102504
- for connection with hydraulic foot pump
- also suitable for Nike
|
Article number: 33200401 |
|
- Ball joint lockable for positioning directly on the vehicle
- for mounting the hydraulic cylinder on a transmission jack with ø 30 mm
- incl. adapter sleeve for reduction to ø 25 mm
- two different clamp sizes available:
item 33200602 - ø 72-82 mm for Paschke, Klann, Enerpac, Hazet, Wallmek. item 33200605 - ø 95-100 mm
Please order matching clamp
|
Article number: 33200602 |
|
- for cylinders from Paschke, Klann, Enerpac, Hazet, Wallmek
- for use with safety holder art. 32200401
|
Article number: 33201607 |
|
- for silent bearing and support joint tool set
- required drive: e.g. hydraulic cylinder, mechanical spindle
|
Article number: 33201611 |
|
- for basic frame 33201607
- also replacement for basic unit hydraulic, item 33202303
|
Article number: 33201603 |
|
- for use with spindle 33201501
|
Article number: 33201501 |
|
- for use with adaptorr, item 33201603
|
Article number: 33201606 |
|
- e.g. for cylinders from Klann / Longus / Berner
- for the use of Paschke basic frames with hydraulic cylinders of other manufacturers
|
Article number: 33201610 |
|
- for the use of Paschke basic frames with hydraulic cylinders of other manufacturers
- for cylinders from e.g. Enerpac (12 t version)
|
Article number: 33202603 |
|
- for use with hydraulic cylinder 32102504
|
Article number: 33202607 |
|
- for higher leverage
- for use with thrust bolt 33202603
|
Article number: 33202401 |
|
- reinforced version with stepped shaft (M20)
- for use with hydraulic cylinder 32102504
|
Article number: 33202402 |
|
- reinforced version
- 17 mm shaft for use with Klann cylinder KL-0040-2500
|
Article number: 32111321 |
|
- for use when changing wheel bearings, wheel hubs, etc.
- ball bearing
|
Article number: 32101611 |
|
- for tension bolt with thread M20, e.g. 31502604, 32102502
|
Article number: 32104615 |
|
- suitable for spindles with M27
|
Article number: 32105401 |
|
|
Article number: 33102603 |
|
|
Article number: 32102502 |
|
- for use with hydraulic cylinder 32102504 e.g. for working with wheel bearing tool
|