Article number: 33806300 |
|
- for use with basic unit 33201302 or 33202303
- in Renault Clio II my. '98-05, Thalia from '00, Twingo from '07
|
Article number: 33806605 |
|
- spare part for set 33806300
|
Article number: 33805300 |
|
- for use with basic unit 33201302 or 33202303
- in Renault Laguna II my. '01-'07, Renault Laguna III my. '07-´15
|
Article number: 32282202 |
|
- for locking screws on the upper control arm
- scope of delivery:
ejector bracket (item 32282611) complete spindle for ejector bracket (item 32281620) gauge for clamping screw (item 32282641) 2x spacer (item 32282642) 5x extension pins 8x50 mm (item 32281625)
|
Article number: 32281624 |
|
- accessory for spindle 32281620 from Set 32282202
|
Article number: 32281620 |
|
- with inner pin 120 mm and screw
- for ejector bracket 32282611 from set 32282202
|
Article number: 32281625 |
|
- for spindle 32281620 from set 32282202
|
Article number: 34201606 |
|
- working range 10 mm to 30 mm
- spare part for spindle 32281620
|
Article number: 34201608 |
|
- spare part for spindle 32281620
|
Article number: 32282641 |
|
- enables precise positioning of the spindle when pushing out the locking screw on aluminium 4-link axle
|
Article number: 32282642 |
|
- to protect against damage during work on the aluminium 4-link axle
|
Article number: 32282611 |
|
- for VAG alloy 4-link axles
- for pressing out the locking screw on the upper control arm
- for use with spindle 32281620
|
Article number: 32282602 |
|
|
Article number: 32282401 |
|
- for drilling out extremely corroded clamping screws on 4-link axles
- ideal as a supplement e.g. for set 32282202
- for use with ejector bracket 32282611
|
Article number: 32282653 |
|
|
Article number: 32282654 |
|
|
Article number: 32280300 |
|
- for knocking out the control arm on 4-link axles and screwed wheel wheel bearings from the wheel bearing housing on Audi / VW vehicles
- Audi A4 / A6 / A8
- Seat Exeo
- Skoda Superb
- VW Passat
- with exchangeable mandrel (Item 32280601)
- also for loosening tightly screwed wheel bearings
The special cranking and length of the tool enables effortless and precise removal of the ball joints on the control arm as well as the knocking out of bolted wheel bearings. To do this, loosen the 4 screws, insert the mandrel into the bolt head and apply bouncing blows on each bolt head. This makes it possible to change the bearings WITHOUT removing the drive shaft.
|
Article number: 32280601 |
|
|
Article number: 34130301 |
|
- mechanical version, incl. thrust spindle and reducer
- for pressing out drive shafts out of 4-, 5- and 6-hole wheel hubs
- suitable for:
ø 98-120 mm (4-hole), e.g. Fiat, Ford, Opel, VW ø 98-112 mm / 112-130 mm (5-hole), e.g. VW, Audi, BMW, Mercedes, Mini ø 160 mm (5-hole), e.g. Ford Transit ø 114-130 mm / 139-150 mm (6-hole), e.g. Mercedes Sprinter, VW Crafter, Ford, Hummer, Mitsubishi, Nissan, SUV's
|
Article number: 34130432 |
|
- for use with hydraulic cylinder 32102504, thrust bolts 33202603 and nut 9053220
- for pressing out drive shafts out of 4-, 5- and 6-hole wheel hubs
- suitable for:
ø 98-120 mm (4-hole), e.g. Fiat, Ford, Opel, VW ø 98-112 mm / 112-130 mm (5-hole), e.g. VW, Audi, BMW, Mercedes, Mini ø 160 mm (5-hole), e.g. Ford Transit ø 114-130 mm / 139-150 mm (6-hole), e.g. Mercedes Sprinter, VW Crafter, Ford, Hummer, Mitsubishi, Nissan, SUV's
|
Article number: 32103301 |
|
- for removal and installation of wheel hubs up to ø 165 mm (cars & vans)
- for compact bearings with ø 62/66/68/72/75/78/82/85 and 92 mm
- for removal of all bolted bearings e.g. Audi / VW
- removal and installation of all screwed hubs / bearing units also Opel Insignia
|
Article number: 32103657 |
|
- for working with wheel bearing tool 32103301
|
Article number: 32103658 |
|
- for tension bolt 32103657
|
Article number: 32103659 |
|
|