Article number: 9200 |
|
- solid fiber construction
- 6 casters for convenient movement
- storage areas for small parts
- padded head-rest
|
Article number: 9202 |
|
- solid metal frame
- 6 rubber casters with ball bearing
- padded cover with raised head-rest
|
Article number: 9204 |
|
- converts easily from creeper to seat by folding
- solid metal frame
- 6 rubber casters with ball bearing
- locking function prevents accidental unfolding
- hard-wearing and padded cover
|
|
|
- provides comfort when working under the vehicle
- thermo-insulating, dirt and moisture repellent material
- oil and fuel resistant
- with carrying handle
|
Article number: 9220 |
|
- provides comfort when working under the vehicle
- thermo-insulating, dirt and moisture repellent material
- oil and fuel resistant
- foldable, with carrying handle
- requires little storage space
|
Article number: 3801 |
|
- magnetic
- protects against dirt, oil and damage to paintwork
|
Article number: 3852 |
|
- for temporary lifting and holding of engines and gearboxes
- solid square tube design
- adjustable width
- stand with rubber sleeves to protect against scratches
- 2 pcs. load hooks with threaded rods M20x2.5
- 2 pcs. lifting chains
- chain length: 97 cm
- total weight (without chains): 16.5 kg
|
Article number: 9299 |
|
- multifunctional
- uses butane gas with piezo ignition
- compact and handy construction
- ideal for mobile applications in hard to reach areas
- multifunctional, e.g. for soldering, welding, shrinking or tinnin
- continuously variable temperature
technical data:
- power: 30 - 125 W
- temperature of soldering tip / hot knife tip / heat blower tip: 250 ~ 500 °C
- temperature without tip (blow torch): 1300 °C
- gas capacity: 20 ml
- power source: butane gas (100%)
|
|
|
- 40 % Sn, 60 % Pb
- 2.5 % flux content according to DIN EN ISO 9454
Only for commercial users!
|
Article number: 40207 |
|
- for general soldering work, e.g. soft soldering, tinning
- complies with DIN EN ISO 9454-1
|
Article number: 9295 |
|
- ideal for quick heating, e.g. soldering, shrinking, flambé
- piezo auto-ignition
- lock switch
- flame regulator
- operating temperature 1.300 °C
- uses conventional light gas
|
Article number: 9290 |
|
- powerful heater with induction technology
- quick, focussed and efficient heating, prevents damage to surroundings
- quick and easy to use
- includes 4 durable heating coils (wire: 4 mm)
- extendable system, additional coils available as accessory
- suitable for many applications on cars and trucks
- for easy loosening of corroded and tight connections and joints, also for separating rigid glued and soldered connections
- applications:
screws, nuts, rivets and bolts steering (e.g. adjusting screws, wheel alignment) exhaust pipe clamps, lines, lambda sensors, injectors, glow plugs etc. running gear components, tight bearings, ball joints, brakes etc. glued screw connections heating of bearings seats for disassembly / assembly - also ideal for bodywork applications, e.g.:
hail dents prepration for tinning separation of glued sheet metal removal of foil and other coating - ideal as alternative to burners with open flames, offering more safety
- manufactured in Europe
- technical data:
connection: 230 V (max. 7.5 A) power: max. 1.75 kW power input: max. 1.5 kW safety class: IP20 weight: 4.5 kg
|
Article number: 9290-06 |
|
- for applications which require heat over a longer period and for which standard coils are too rigid
- the coil should be wrapped around the component at least 3 times for best results
|
Article number: 9290-07 |
|
- for applications which require focussed heat, e.g. screw and rivet connections
- the coil enables precise heating without damaging surrounding components
|
Article number: 9290-08 |
|
- for applications for which standard coils are too rigid
- the wire coil can be fitted individually to each component
- the coil should be wrapped around the component at least 3 times for best results
|
Article number: 9291 |
|
- extremely powerful heater with induction technology
- quick, focussed and efficient heating, prevents damage to surroundings
- includes 1 heating coil with offset focus
- extendable system, heating coil with straight focus available as accessory
- suitable for many applications on cars and trucks
- for easy loosening of corroded and tight connections and joints, also for separating rigid glued and soldered connections
- applications:
screws, nuts, rivets and bolts steering (e.g. adjusting screws, wheel alignment) exhaust pipe clamps, lines, lambda sensors, injectors, glow plugs etc. running gear components, tight bearings, ball joints, brakes etc. glued screw connections heating of bearings seats for disassembly / assembly - also ideal for applications on trailers, e.g.:
separation of glued sheet metal removal of foil and other coating - ideal as alternative to burners with open flames, offering more safety
- fluid cooled (refill available)
- manufactured in Europe
- technical data:
connection: 230 V (max. 16 A) power: max. 3.5 kW power input: max. 3.5 kW safety class: IP22 weight: 13.5 kg cooling fluid: 2.5 L
|
Article number: 9292 |
|
- powerful heater with induction technology
- quick, focussed and efficient heating, prevents damage to surroundings
- compact, light, quick and easy to use
- includes 4 durable heating coils (wire: 4 mm)
- extendable system, additional coils available as accessory
- suitable for many applications on cars and trucks
- for easy loosening of corroded and tight connections and joints, also for separating rigid glued and soldered connections
- applications:
screws, nuts, rivets and bolts steering (e.g. adjusting screws, wheel alignment) exhaust pipe clamps, lines, lambda sensors, injectors, glow plugs etc. running gear components, tight bearings, ball joints, brakes etc. glued screw connections heating of bearings seats for disassembly / assembly
- also ideal for bodywork applications, e.g.:
hail dents prepration for tinning separation of glued sheet metal removal of foil and other coating
- ideal as alternative to burners with open flames, offering more safety
- manufactured in Europe
- technical data:
connection: 230 V (max. 5.4 A), protective cut-off at max. 6.3 A power: max. 1.2 kW safety class: IP20 weight: 1.0 kg
|
|
|
- adjustable pry bar for maximum leverage in narrow spaces
- flexible jaw
- telescopic handle
- press button for quick-lock function
- extra slim design
- universal application for cars and commercial vehicles
|
Article number: 5469 |
|
- flexible head, lockable in 15 positions
- quick locking function with press button on head
- very versatile, suitable for e.g. bearings, pulleys, seals, wheel hubs
|
Article number: 5460 |
|
- hardened carbon steel, 2-component handles
|
|
|
- 2-component handles, with striking cap
- hardened chrome-molybdenum-steel
|
Article number: 3714 |
|
- avoids damage when opening car doors
- suitable for many applications concerning assembly and disassembly, e.g. interior panels, levelling during door assembly
- also suitable for builders, e.g. for alignment when fitting windows or door frames
- with bellows and release valve, quick and easy to use
- firm material for high pressure
|
|
|
|
Article number: 393 |
|
- suitable for many applications
- for safe and ready-to-use storage of tools
- for wall fixing
|