Article number: 5355 |
|
- for cleaning and rethreading wheel stud threads
- for external threads: M12x1.25, M12x1.5, M14x1.5
- no alignment difficulties: the thread chaser can first be attached to any undamaged section of the thread, and then work its way through to the damaged thread
|
Article number: 5357 |
|
- for cleaning the wheel hub on vehicles with wheel studs
- suitable for studs up to size M16
- corrosion on the contact surface between hub and wheel cause wrong
torque measurements and lead to loose wheels - cleaning discs with quick change fittings
- 3x cleaning disc ø 40 mm, for M12
2x cleaning disc ø 47 mm, for M14 and M16
|
Article number: 5354 |
|
- for quick and easy cleaning of wheel studs and bolts
- suitable for cars and commercial vehicles
- brushes with quick change fittings
|
Article number: 8240 |
|
- steel balls in hammer head prevent blow-back and ensure stronger impact
- ideal for loosening stuck rims when changing wheels
- also suitable for bodywork applications, e.g. dent removal
- fully rubber-coated
- handle made from fiberglass
|
Article number: 8241 |
|
- steel balls in hammer head prevent blow-back and ensure stronger impact
- ideal for loosening stuck rims when changing wheels
- handle made from fiberglass with rubber-coated grip
|
Article number: 8242 |
|
- steel balls in hammer head prevent blow-back and ensure stronger impact
- ideal for loosening stuck rims when changing wheels
- heavy duty model, specially suitable for trucks and utility vehicles
- handle made from fiberglass with rubber-coated grip
|
Article number: 8204 |
|
- ideal for assembling RDKS / TPMS sensors
- simply screw cap on valve to depress valve and deflate
- avoids removing the valve
- 4 colours with position marking for wheels / sensors, to ensure that the wheel will be assembled to same position as before
- reprogramming of sensors is not necessary in many cases
|
Article number: 8201 |
|
- for mounting and dismounting of the special TPMS sensors and tyre valves
- for the common systems from Siemens VDO, Beru, Schrader, etc.
- Torque spanner (2-10 NM) for union nuts, with automatic click release and quick adjust and lock system, including test certificate
- preset torque wrench (1.4 NM) for the screws of most systems
|
Article number: 8220 |
|
- for quick removal of the old valve
- cuts off on inner side of rim
- avoids scratches (e.g. when using a knife)
- blade width: 18 mm
- max. jaw width: 30 mm
|
Article number: 8219 |
|
- for bent valves
- ideal for hard to reach valves e.g. on scooter and motorcycle wheels
- adjustable supporting point to suit various rim widths
- protective coating on supporting point to avoid scratches to the rim
- for safe and powerful pulling out and installing of the valve
|
Article number: 8203 |
|
- for replacing rubber valves without removing the tyre
- ideal for quick replacement of damaged or leaking rubber valves
on cars, vans and motorcycles without removing the tyre from the rim
|
Article number: 8207 |
|
- for pulling “Snap-In” valves into the rim valve hole for tubeless tires
- integrated valve core fitting tool at rear end
- suitable for all rims (cars / vans / caravans)
- synthetic material, prevents damage to rims
- 6 notches, for secure hold on rims
- lockable head, for easy fixing of rubber valves
|
Article number: 8208 |
|
- for pulling “Snap-In” valves into the rim valve hole for tubeless tires
- suitable for all rims (cars / vans / caravans)
- solid metal body with composite surface, prevents damage to rims
- 5 notches, for secure hold on rims
- lockable head, for easy fixing of rubber valves
- slightly offset shape, for optimal leverage when fitting valves
|
Article number: 8216 |
|
- pilot pin simplifies assembly and avoid slipping of
- suitable for torque wrench operation
|
|
|
- prevents overtightening when assembling valve inserts
- audible click when torque is reached
|
Article number: 8233 |
|
- for motorcycle and car wheels
- protects against scratches and other damage to the rim
- ideal when used in combination with tire lever
- with cord, for pulling out the protector when it slips between rim and wheel
|
|
|
- made from special nylon material - protects against scratches on wheels
- to be hanged on outer rim, protects against slipping of
- holds down tire bead during assembly
- avoids damage to the carcass
|
Article number: 8294 |
|
- for loosening glued balancing weights
- extra narrow gripping profile, ideal also for motorcycle weights
- plastic protection on hammer head and gripping jaws, to avoid damages and paint damage when applying or removing adhesive weights on alloy rims
- 2-stage adjustable, stage 1: 4-16 mm, stage 2: 12-26 mm, for narrow and wide adhesive weights
- self-opening handles with spring and rubber coating
|
Article number: 294 |
|
|
|
|
- suitable for wide range of applications, e.g. removing wheel weight adhesives on alloy wheels or trim strips without damaging car paint
- handle with striking cap for light hitting
|
Article number: 8235 |
|
- for removing remainders on painted surfaces, e.g. stickers, adhesives, colour and balancing weights on wheels
- incl. adapter with 6 mm mandrel, 18 mm long (total 40 mm)
- pad-ø 90 mm x 15 mm thickness
- thread 5/16" x 24, 13 mm long
|
Article number: 8263 |
|
- with exchangeable plastic protector, avoids damage to wheels
- protective plastic attachment prevents scratching and slipping off
- rounded edges avoid damage to the carcass
- ideal length for powerful leverage, specially useful for "runflat" and low profile tires
|
|
|
- with exchangeable plastic protector, avoids damage to wheels
- manufactured from specialist steel, hardened and chrome plated
|
|
|
- manufactured from specialist steel, hardened and chrome plated
|