Article number: 5507 |
|
- for disassembly / assembly of the outer supporting joints
- can be upgraded with optional extension set No. 5507/3 for disassembly / assembly of stabiliser ball joints on front control arm
- for Mercedes series W211 (E-class), W220 (S-class), W230 (SL-class)
- c-shaped press frame allows all jobs to be performed directly on the vehicle
- avoids removal of other components like e.g. steering knuckles
- impact quality spindle with trapezoid thread
- thrust pieces from No. 5507/3 and 5507/4 can also be operated with press frame No. 5508, requires adapter sleeve No. 5507/1
|
Article number: 5507-3 |
|
- for disassembly / assembly of stabiliser ball joints on front control arm
- extension set for nr. 5507 or to be operated in combination with press frame no. 5508 and adapter sleeve no. 5507/1
|
Article number: 5507-4 |
|
- for disassembly / assembly of the outer supporting joints
- for Mercedes series W211 (E-class), W220 (S-class), W230 (SL-class)
- to be operated with press frame No. 5508 and adapter sleeve No. 5507/1
- allows all jobs to be performed directly on the vehicle
- avoids removal of other components like e.g. steering knuckles
|
Article number: 5507-1 |
|
- to operate thrust pieces from set No. 5507-3 and No. 5507-4 with press frame No. 5508
|
Article number: 5514 |
|
- specialist tool for e.g. T4 Bus, Multivan, California
- for disassembly / assembly of upper ball joint, front axle, supporting joint
- significant time saving (approx. 2-3 hours) when replacing supporting joints, rubber metal bearings / silent blocks, because disassembly of control arm is not necessary anymore
- the upper ball joint can replaced in approx. 30 min. without removing the control arm
|
Article number: 5542 |
|
- for Mercedes M-class
- for disassembly / assembly of screwed supporting joints
- for front and rear axle
|
Article number: 5543 |
|
- for Citroen and Peugeot cars
- for disassembly / assembly of screwed supporting joints
- Citroen BX (´09/82-´94), C5, Xantia, Peugeot 305 (´07/82-´90), 405 (from ´06/87 onwards), 406, 605 and 607
|
Article number: 5546 |
|
- for disassembly/assembly of the bolted suspension joints on the front axle
- for use with Citroen Dispatch, Jumpy and SpaceTourer
- Peugeot Expert and Traveller
- Toyota Proace
|
Article number: 5545 |
|
- for Citroen and Peugeot cars
- for disassembly / assembly of the lower bolted suspension joint
- in Citroen C5 III and C6
- in Peugeot 407 (6C/6D/6E) and 508 (8D/8E)
|
Article number: 4535 |
|
- spindle with pivoted ball for use with impact wrenches
- significantly higher loosening torque due to rotation and impact impulse
- vibrations generated by the impact wrench provide additional for faster release of tight ball joints
- vision panel for visual control while working
- ideal for use with MB Sprinter, VW LT, VW Crafter
- spread: 60 mm
- jaw width: 35 mm
|
|
|
- for extracting ball joints e.g. on track rod ends
- for almost all cars and vans
|
Article number: 4565 |
|
- for extracting ball joints e.g. on track rod ends
- for almost all cars and vans
|
Article number: 3458 |
|
- for extracting ball pins on ball joints, steering knuckles, track rod ends
- suitable for vans, 4-wheel drives and heavy cars
- universal tool with 5 quick change separator forks
- adjustable spread and pressure range
|
Article number: 5516 |
|
- suitable for heavy cars, 4-wheel drives and vans
|
Article number: 5517 |
|
- with lever transmission, 2 to 1
- for extracting ball pins on ball joints, steering knuckles, track rod ends
|
|
|
- for extracting ball joints e.g. on track rod ends
|
|
|
- forged, chrome plated
- range adjustable in 2 positions
- for extracting ball joints when disassembling track rods and supporting joints on front axle
|
Article number: 183 |
|
- forged, chrome plated
- for extracting ball joints when disassembling track rods
- not suitable for supporting joints
- for almost all cars and vans
|
Article number: 4570 |
|
- for extracting ball joints e.g. on track rod ends
|
Article number: 4576 |
|
- extra long lever for loosening and turning stubborn track rods
- with self-clamping jaw
- broad jaw to prevent damage to track rod
- toothed jaw for extra grip
- for cars, light SUVs and vans
|
|
|
- for disassembly / assembly of axial track rod joints
- considerable time saving advantage due to open construction and clamping of rod ends
- drive pipe operated with 1/2" sq. drive ratchet or 27 mm wrench
|
Article number: 4739 |
|
- for sidewise working when assembling hose clamps "Oetiker"
- for hard to reach areas, specially steering gear boots and hoses
- for e.g. Audi / VW, Renault, Vauxhall, Ford etc.
|
|
|
- for separating ball joints e.g. on track rods
- forged carbon steel
|
Article number: 4557 |
|
- for separating ball joints e.g. on track rods
- forged carbon steel
|