Article number: 5551 |
|
- for easy mounting of the wheel bearing/wheel hub unit on VAG models
- the bearing is pushed onto the rear axle journal without tension and without tilting
- pressure over the inner bearing ring prevents damage to the bearing during installation
- in Audi A1 (from ´10-´19), A2 (from ´00-´05), A3 (from ´96-´03) and TT (from´98-´06)
- in VW Bora (from ´98-´05), Caddy (from ´95-´04), Fox (from ´03-´14), Golf (from ´93-´05), Lupo (from ´98-´05) and Polo (from ´94)
- in Seat Arosa (from ´97-´04), Cordoba (from ´96-´09), Ibiza (from ´93), Leon (from ´99-´06) and Toledo (from ´98-´06)
- in Skoda Fabia (from ´99), Oktavia (from ´99-´10) and Roomster (from ´06-´15)
|
Article number: 5579 |
|
- comprehensive set for most vehicles from Audi / VW
- bearing-ø 72 mm in VW Polo (from 2002), Fox (from 2005), Audi A1 (from 2011), A2 (from 2000), Skoda Fabia (from 2000), Seat Ibiza (from 2002)
- bearing-ø 85 mm in VW T5, Touareg (with 16 inch running gear)
|
Article number: 5572 |
|
- for VW Polo (from 2002), Fox (from 2005), Audi A1 (from 2011), A2 (from 2000), Skoda Fabia (from 2000), Seat Ibiza (from 2002)
|
Article number: 5585 |
|
- for VW T5, Touareg (with 16 inch running gear)
|
Article number: 5583 |
|
- comprehensive set for most vehicles from Ford
- for bearing-ø 78 mm in Ford C-Max, Ford Focus II, Mazda 3, Volvo C30, C70, S40, V50
- for bearing-ø 82 mm in Ford Mondeo (from 2007), Galaxy (from 2006), S-Max (from 2006), Focus, Focus RS, Land Rover Freelander 2 (from 2006), Volvo V60, S60, XC60, V70 (from 2007), XC70, S80 (from 2006)
|
Article number: 5578A |
|
- for Ford C-Max, Ford Focus II, Mazda 3, Volvo C30, C70, S40, V50
|
Article number: 5582 |
|
- for Ford Mondeo (from 2007), Galaxy (from 2006), S-Max (from 2006), Focus, Focus RS, Land Rover Freelander 2 (from 2006), Volvo V60, S60, XC60, V70 (from 2007), XC70, S80 (from 2006)
|
Article number: 5562 |
|
- for VW Lupo, Audi A2 1.2L
- operation additionally requires thrust spindle No. 5580/SP, thrust plate No. 5580/PL and thrust bolts Nr. 5572/B
|
Article number: 5566 |
|
- for VW Polo, Skoda Fabia
- operation additionally requires thrust spindle No. 5580/SP, thrust plate No. 5580/PL and thrust bolts Nr. 5572/B
|
Article number: 5572-Z |
|
- for VW Polo (from 2002), Fox (from 2005), Audi A1 (from 2011), A2 (from 2000), Skoda Fabia (from 2000), Seat Ibiza (from 2002)
- operation additionally requires thrust spindle No. 5580/SP and thrust plate No. 5580/P
- fits perfectly in set No. 5585
|
Article number: 5585-Z |
|
- for VW T5, Touareg (with 16 inch running gear)
- operation additionally requires thrust spindle No. 5580/SP and thrust plate No. 5580/PL
- fits perfectly in set No. 5572
|
Article number: 5578-Z |
|
- for Ford C-Max, Ford Focus II, Mazda 3, Volvo C30, C70, S40, V50
- operation additionally requires thrust spindle No. 5580/SP and thrust plate No. 5580/PL
- fits perfectly in set No. 5582
|
Article number: 5582-Z |
|
- for Ford Mondeo (from 2007), Galaxy (from 2006), S-Max (from 2006), Focus, Focus RS, Land Rover Freelander 2 (from 2006), Volvo V60, S60, XC60, V70 (from 2007), XC70, S80 (from 2006)
- operation additionally requires thrust spindle No. 5580/SP and thrust plate No. 5580/PL
- fits perfectly in set No. 5578A
|
Article number: 5575-Z |
|
- for Smart Forfour (from 2004), Mitsubishi Colt 6, front axle (from 2004)
- operation additionally requires thrust spindle No. 5580/SP and thrust plate No. 5580/PL
|
Article number: 5596 |
|
- for Mercedes Sprinter (906), V Class (W447), Viano and Vito (W639)
- for VW Crafter (2E 30-50)
- for use with a workshop press
- to replace the wheel bearing hub unit on the front axle without replacing the whole steering knuckle
|
Article number: 5534 |
|
- for Mercedes W124 (E-class), W129 (SL-class), W201 (190), W202 (C-class)
- for assembly of wheel bearing and axle flange on rear axle
- spindle and nut with trapeziod thread
|
Article number: 5531 |
|
- universally suitable for wheel bearings on many popular cars
- for assembly and disassembly of wheel bearings and hubs directly on the vehicles
- avoids removal of suspension struts, therefore does not require any subsequent measurement
- thrust contact on outer ring for professional assembly of bearing
|
Article number: 350 |
|
- universally suitable for wheel bearings on many popular cars
- for assembly and disassembly of wheel bearings and hubs directly on the vehicles
- avoids removal of suspension struts, therefore does not require any subsequent measurement
|
Article number: 4746 |
|
- for circlips without holes on the wheel bearings
- disassembly of the retaining rings without special tools is almost impossible
- during wheel bearing replacement and chassis repair
- suitable for:
Citroen Saxo, Xsara, Xsara Break and Xsara Coupe Peugeot 106 II, 206, 206SW, 206 Plus, 306, 306 Break and 306 Cabrio Nissan Micra Renault Clio
|
Article number: 5505 |
|
- for removal and replacement of bearings silent blocks, ball bearings, rubber bearings, also bushes, oil seals, etc.
- 4 spindles: M10, 12, 14, 16
- spindle length: 350 mm
- spindle nuts equipped with thrust bearings
- 20 thrust sleeves, slitted pattern for monitoring work progress,
outer-ø: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm inner-ø: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72 mm
|
Article number: 5508 |
|
- for extracting workpieces without bore, e.g. supporting joints or bushes with too small bore
- valuable accessory for common press and pull sleeve sets, e.g. No. 5505
- open c-shaped construction allows more flexible operation directly on vehicle compared to conventional press frames
- magnetic holders on thrust plates for convenient working
- with impact quality M18 vibration spindle; the momentum produced by impact wrench acts like hammer strokes on the workpiece, thus causing tight connections to break open
- can be converted for use with hydraulic spindle (UN1.1/2"x16 thread), e.g. No. 5501
|
Article number: 5550 |
|
- for assembly of main bearings on rear axle
- on VW Golf IV, Polo 9N, Bora and New Beetle
- on Audi A3 and TT
- on Skoda Fabia, Fabia Praktik and Oktavia
- on Seat Ibiza IV, Cordoba, Leon and Toledo II
- fits precisely on axle casing for support, allowing correct alignment when assembling new bush
- not suitable for disassembly of old bushes
|
Article number: 5512 |
|
- designed for the silent blocks in the front axle bracket
- quick assembly / disassembly directly on the vehicle
- on VW Polo (9N)
- on Seat Ibiza IV, Cordoba (from ‘02), Altea
- on Audi A2
|
Article number: 5511 |
|
- for Renault Laguna II
- for convenient disassembly and assembly of rear axle box arrangement
|