Article number: 39690 |
|
- 5% cobalt alloy for maximum durability
- for material up to 4 mm thickness
- 4-20 and 4-30 mm with integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
|
Article number: 443 |
|
- HSS, titanium coated, minimum wear
|
Article number: 39691 |
|
- 5% cobalt alloy material for max. durability
- 9 drill steps increasing by 1 mm
- for material up to 4 mm thickness
|
Article number: 39692 |
|
- 5% cobalt alloy material for max. durability
- 9 drill steps increasing by 2 mm
- for material up to 4 mm thickness
- integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
|
Article number: 39693 |
|
- 5% cobalt alloy material for max. durability
- 14 drill steps increasing by 2 mm
- for material up to 4 mm thickness
- integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
|
Article number: 39695 |
|
- 5% cobalt alloy material for max. durability
- 9 drill steps increasing by 2 mm
- for material up to 4 mm thickness
- integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
|
Article number: 39698 |
|
- titanium coated, minimum wear
- 9 drill steps increasing by 2 mm
- for material up to 4 mm thickness
- integrated edge breaker for simultaneous and double-sided deburring of sheets up to 1 mm thickness
|
|
|
- HSS, titanium coated, minimum wear
|
Article number: 39601 |
|
|
|
|
|
Article number: 9610 |
|
- 5% cobalt alloy for maximum tool life and cutting ability
- ground from solid material, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron
- each size 10 pcs., ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 mm
- each size 5 pcs., ø 8.5, 9.0, 9.5, 10.0 mm
|
Article number: 9611 |
|
- 5% cobalt alloy material for max. durability
- fully ground, manufactured according to DIN 338
- ideal for difficult to machine materials, e.g. V2A, V4A, steel, cast iron
- with split point according to DIN 1412C, tip angle 135°
- each size 1 pcs. ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0 mm
|
Article number: 9612 |
|
- 5% cobalt alloy for maximum tool life and cutting ability
- ground from solid material, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron
- ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0 mm
|
Article number: 9619 |
|
- 5% cobalt alloy for maximum tool life and cutting ability
- ground from solid material, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron
- ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm
|
|
|
- 5% cobalt alloy for maximum tool life and cutting ability
- ground from solid material, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials, alloyed and unalloyed <1300 N/mm², e.g. V2A, V4A, steel, cast iron
|
Article number: 9620 |
|
- fully ground, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron
- each size 10 pcs., ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 mm
- each size 5 pcs., ø 8.5, 9.0, 9.5, 10.0 mm
|
Article number: 9622 |
|
- fully ground, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron
- ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0 mm
|
Article number: 9623 |
|
- fully ground, manufactured according to DIN 338
- ideal for difficult to machine materials, e.g. V2A, V4A, steel, cast iron
- with split point according to DIN 1412C, tip angle 135°
- ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.5, 13.0 mm
|
Article number: 9629 |
|
- fully ground, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron
- ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm
|
|
|
- fully ground, manufactured according to DIN 338
- with split point from 3 mm ø, according to DIN 1412C, tip angle 135°
- triangle shank from 5 mm ø, to prevent slipping in the chuck
- ideal for difficult to machine materials < 1100 N/mm², e.g. steel, cast iron
|
Article number: 9600 |
|
- titanium nitrided, for higher durability and better sliding properties
- roll forged, manufactured according to DIN 338
- edge ground, tip angle 118°
- for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron
- each size 10 pcs., ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0 mm
- each size 5 pcs., ø 8.5, 9.0, 9.5, 10.0 mm
|
Article number: 9633 |
|
- titanium nitrided, for higher durability and better sliding properties
- roll forged, manufactured according to DIN 338
- edge ground, tip angle 118°
- for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron
- ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.5, 10.0 mm
|
Article number: 9634 |
|
- titanium nitrided, for higher durability and better sliding properties
- roll forged, manufactured according to DIN 338
- edge ground, tip angle 118°
- for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron
- ø 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0 mm
|
Article number: 459 |
|
- titanium nitrided, for higher durability and better sliding properties
- roll forged, manufactured according to DIN 338
- edge ground, tip angle 118°
- for drilling in ordinary steel < 800 N/mm², e.g. steel, cast iron
|