Article number: 144 |
|
- metric M2 - M18, normal and fine thread
- each size 1 die + 2 taps:
M2 x 0.40, M3 x 0.50, M4 x 0.70, M5 x 0.80, M6 x 0.75, M6 x 1.00, M7 x 0.75, M7 x 1.00, M8 x 0.75, M8 x 1.00, M8 x 1.25, M9 x 0.75, M9 x 1.00, M9 x 1.25, M10 x 0.75, M10 x 1.00, M10 x 1.25, M10 x 1.50, M11 x 0.75, M11 x 1.00, M11 x 1.25, M11 x 1.50, M12 x 0.75, M12 x 1.00, M12 x 1.25, M12 x 1.50, M12 x 1.75, M14 x 1.00, M14 x 1.25, M14 x 1.50, M14 x 2.00, M16 x 1.00, M16 x 1.50, M16 x 2.00, M18 x 1.50 - accessory:
2x die holder M25 and M38 2x tap wrench M3-M12 and M6-M20 1x T-handle for taps
|
Article number: 9670 |
|
- metric M6 - M24, normal and fine thread
- each size 1 tap + 1 die:
M6 x 0.75, M6 x 1.00, M8 x 1.00, M8 x 1.25, M10 x 1.25, M10 x 1.50, M12 x 1.50, M12 x 1.75, M14 x 1.50, M14 x 2.00, M16 x 1.50, M16 x 2.00, M18 x 1.50, M18 x 2.50, M20 x 1.50, M20 x 2.50, M22 x 1.50, M22 x 2.50, M24 x 1.50, M24 x 3.00 - accessory:
die holder with reducer tap wrench M6 - 24 t-handle for taps screwdriver
|
Article number: 149 |
|
- metric M6 - M24, normal and fine thread
- each size 1 tap + 1 die:
M6 x 0.75, M6 x 1.00, M8 x 1.00, M8 x 1.25, M10 x 1.25, M10 x 1.50, M12 x 1.50, M12 x 1.75, M14 x 1.50, M14 x 2.00, M16 x 1.50, M16 x 2.00, M18 x 1.50, M18 x 2.50, M20 x 1.50, M20 x 2.50, M22 x 1.50, M22 x 2.50, M24 x 1.50, M24 x 3.00 - accessory:
die holder with reducer tap wrench M6 - 24 t-handle for taps screwdriver
|
Article number: 149Z |
|
- inch 1/4" - 1", normal and fine thread
- each size 1 die + 1 tap:
1/4NF28, 1/4NC20, 5/16NF24, 5/16NC18, 3/8NF24, 3/8NC16, 7/16NF20, 7/16NC14, 1/2NF20, 1/2NC13, 9/16NF18, 9/16NC12, 5/8NF18, 5/8NC11, 3/4NF16, 3/4NC10, 7/8NF14, 7/8NC9 1NF14, 1NC8
- accessory:
die holder with reducer tap wrench t-handle for taps screwdriver
|
Article number: 39660 |
|
- hand taps, 3 pcs., DIN 352, metric, M3, 4, 5, 6, 8, 10, 12
- die, DIN 223 (EN 22568), metric, M3, 4, 5, 6, 8, 10, 12
- core hole drills, HSS-E Co5, ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm
- countersink, HSS-G M2, DIN335-C, 90°, ø 10.4 + 16.5 mm
- adjustable tap wrench, DIN 1814, 180 mm, no. 1.1/2, M1 - M12
- die holder, DIN 225 (EN 22568), 25 x 9
- screwpitch gauge, 12 sizes
- screwdriver, plain slot 5.5 mm
|
|
|
- metric M3 - M12, in strong metal case
- each size 1 set hand taps, 3 pcs. M3, 4, 5, 6, 8, 10, 12
- each size 1 die M3, 4, 5, 6, 8, 10, 12
- 1 tap wrench M3 - M12
- 1 die holder 25 x 9
- 1 screwpitch gauge
- 1 screwdriver
|
Article number: 9651 |
|
- short machine tap, metric, M3, 4, 5, 6, 8, 10, 12
- core hole drill, HSS-G, black-oxide, ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm
- adjustable tap wrench, DIN 1814, 180 mm, No. 1.1/2, M1 - M12
|
Article number: 9650 |
|
- metric M3 - M12, incl. twist drill with core hole size
- short machine tap M3, M4, M5, M6, M8, M10, M12
- core hole drills ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm
- adjustable tap wrench, DIN 1814, 180 mm, M1 - M12
|
Article number: 39602 |
|
- 6 core hole twist drill bits ø 3.3, 4.2, 5.0 ,6.8, 8.5, 10.2 mm
- 6 tap bits M4, M5, M6, M8, M10, M12
- 1 micro reversible ratchet for bits
- 1 adapter, 1/4" square x 1/4" hexagon
- 2 bit holder with quick-action chuck, length 67 mm, 150 mm
|
|
|
|
|
|
- DIN 225 (DIN EN 22568), cast zinc, for round dies
|
|
|
|
|
|
|
|
|
|
|
|
- DIN 1814, cast zinc, hardened jaw for taps
|
Article number: 9678 |
|
- for taps with external square drive 2.7 - 8.4 mm (corresponds to approx. M1.5 - M12 or 1/16 - 1/2" NF/NC)
- to be operated with ratchet, sliding t-bar or any other drive tools
- especially useful for reaching deep spaces when combined with an extension bar
- strong magnet holds taps firmly in place
|
|
|
- reversible left / right, for taps
|
|
|
- for repairing damaged threads and plating threads in materials with low shearing strength
- supplied in metal case
- 5 twist drills
- 5 taps
- 5 installation tools
- 5 tang breakers
- 110 thread inserts
|
|
|
- for repairing damaged threads and plating threads in materials with low shearing strength
- supplied in metal case
- 1 twist drill
- 1 tap
- 1 installation tool
- 1 tang breaker
- thread inserts (15 respectively 25 pcs.)
|
|
|
- for thread repair kits Nr. 5370, 5375, 5380-5387
|
|
|
- for internal and external threads
|
Article number: 5363 |
|
- for cleaning and rethreading internal and external threads
- suitable for many applications, e.g. drive shafts, lambda sensors and wheel bolts
- to be operated either with included turning handle or socket and ratchet
- each size 1 thread repair tool for internal and external thread
|
Article number: 5350 |
|
- for broken screws and bolts M5 - M16
- 5 HSS drills: 3.2, 4.8, 6.4, 8.0, 8.7 mm
- 10 pilot bushes: 4.0, 4.8, 4.8, 4.8, 6.0, 7.1, 7.1, 7.1, 9.2, 9.5 mm
- 5 extraction pins: 3.2, 4.8, 6.4, 8.0, 8.7 mm
- 5 extraction nuts: 10, 11, 13, 14, 17 mm
|
Article number: 39616 |
|
- for broken screws and bolts M5 - M16
- 5 HSS drills: 3.2, 4.8, 6.4, 8.0, 8.7 mm
- 10 pilot bushes: 4.0, 4.8, 4.8, 4.8, 6.0, 7.1, 7.1, 7.1, 9.2, 9.5 mm
- 5 extraction pins: 3.2, 4.8, 6.4, 8.0, 8.7 mm
- 5 extraction nuts: 10, 11, 13, 14, 17 mm
|