Article number: 8759 |
Ø: 5.2-12.7 mm, Description: , Round Shank: ø 10 mm, Length: 180 mm, pcs: 6
|
- different diameters for the most popular bolt sizes
- reduced shaft with specialist profile prevents the punch from getting stuck in bore hole
- suitable for all common air hammers, e.g. Condor No. 8810
|
5.2-12.7 mm
|
|
ø 10 mm
|
180 mm
|
6
|
Article number: 8765 |
Ø: , Description: , Round Shank: ø 10 mm, Length: 180 mm, pcs: 5
|
- suitable for all common air hammers, e.g. Condor item number 8810
|
|
|
ø 10 mm
|
180 mm
|
5
|
Article number: 8760 |
Ø: , Description: , Round Shank: ø 10 mm, Length: , pcs: 3
|
- impact socket adapter, for loosening tight and corroded screws through impacts and turn movement
- impact chisel, flat head, universal application for many tight connections, e.g. wheel bearings, bushes, ball pins, silent bushes, conical seats
- impact chisel, radial milled head, for loosening track rod connections
|
|
|
ø 10 mm
|
|
3
|
Article number: 8752 |
Ø: , Description: , Round Shank: ø 10 mm, Length: , pcs:
|
- to apply thrust plates from bearing and set drivers sets Nr. 5452 and 5453 with impact hammers with round shank ø 10 mm
|
|
|
ø 10 mm
|
|
|
Article number: 5452 |
Ø: , Description: , Round Shank: , Length: , pcs: 51
|
- to press and extract bearings, bushes etc.
- 49 thrust plates: ø 18 - 65 mm (increasing by 1 mm each size), 74 mm
- 1 receiver, can hold max. 2 thrust plates
- 1 impact driver
- use accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810
- also suitable for using in workshop press
|
|
|
|
|
51
|
Article number: 5453 |
Ø: , Description: , Round Shank: , Length: , pcs: 21
|
- to press and extract bearings, bushes etc.
- 17 thrust plates: ø 70 - 150 mm (increasing by 5 mm each size)
- 2 receivers, can hold max. 2 thrust plates
- 1 impact driver
- 1 hexagon key, 3 mm
- use accessory thrust plate adapter No. 8752 (not included) to apply thrust plates with air hammer No. 8810
- also suitable for using in workshop press
|
|
|
|
|
21
|
Article number: 8750 |
Ø: , Description: , Round Shank: ø 10 mm, Length: , pcs: 3
|
- to be operated with air hammer
- after removing the nut, the guide sleeve is used to lead the pin punch
- includes extension bolt
- easy disassembly through vibration effect
|
|
|
ø 10 mm
|
|
3
|
Article number: 8751 |
Ø: , Description: blade length 115 mm, ø 6.2 mm, Round Shank: ø 10 mm, Length: , pcs:
|
- to be operated with air hammer
- extra long shaft with center ball on tip
- After separating the hexagon screw head, the clamp bolt is driven out of the axle housing. The high impact rate combined with powerful impacts breaks up corrosion and allows rust remover to enter.
|
|
blade length 115 mm, ø 6.2 mm
|
ø 10 mm
|
|
|
Article number: 8762 |
Ø: , Description: for inner and outer pipes, Round Shank: ø 10 mm, Length: , pcs: 2
|
- blade width: 23 mm
- for separating exhaust pipes without causing damage
- turnable, can be applied in almost any position
- can be used with any popular air hammer
- also suitable for other applications
|
|
for inner and outer pipes
|
ø 10 mm
|
|
2
|
Article number: 8762-01 |
Ø: , Description: for inner pipes, Round Shank: ø 10 mm, Length: , pcs:
|
- blade width: 23 mm
- for separating exhaust pipes without causing damage
- turnable, can be applied in almost any position
- can be used with any popular air hammer
- also suitable for other applications
|
|
for inner pipes
|
ø 10 mm
|
|
|
Article number: 8762-02 |
Ø: , Description: for outer pipes, Round Shank: ø 10 mm, Length: , pcs:
|
- blade width: 23 mm
- for separating exhaust pipes without causing damage
- turnable, can be applied in almost any position
- can be used with any popular air hammer
- also suitable for other applications
|
|
for outer pipes
|
ø 10 mm
|
|
|