Article number: 5353 |
|
- for cleaning and rethreading external threads, e.g. on stub shafts, hydraulic systems, steering and driving rods
- no alignment difficulties: the thread chaser can first be attached to any undamaged section of the thread, and then work its way through to the damaged threads
- for ø 35 - 130 mm, metric and inch, right and left hand threads
- content:
1x main body 2x metric plates, pitch: 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0, 3.5 mm 4x inch plates (AF), pitch: 4, 5, 6, 7, 7.5, 8, 9, 10, 11, 11.5, 12, 14, 16, 18, 20, 24
|
Article number: 9903 |
|
- for collecting oil, e.g. when disassembling full floating axles or driveshafts
|
|
|
- in Mercedes trucks Actros, Arocs and Antos
- for work on axles, bellows, leaf springs and stabilisers
|
Article number: 4571-39 |
|
- designed for conical seat connections, e.g. on Actros, TGA
- high pulling force through combined twist and impact momentum
- trapezoid thread, suitable for impact tools
|
Article number: 4775 |
|
- for operating the pressure screw on the nozzle holder
- for Mercedes-Benz, MAN and other commercial vehicles
- also suitable for construction and agricultural vehicles
|
Article number: 4776 |
|
- special toothed pattern for easy disassembly and assembly of diesel injectors
- internal hexagon drive for counterholding when pulling
|
Article number: 4781 |
|
|
|
|
|
Article number: 4779 |
|
|
Article number: 51101 |
|
- for manual turning of the engine
- enables pinpoint positioning
- when adjusting valve clearance or engine repair
|
Article number: 51102 |
|
- for Mercedes engines with 6, 8 and 10 cylinders
- for MAN engines with 12 cylinders
- for manual turning of the engine
- enables pinpoint positioning
- for adjustment work on valve clearance or engine repair
|
Article number: 51103 |
|
- for Mercedes Actros and Atego engines with 4, 6 and 8 cylinders
- for MAN engines with 5, 6 and 8 cylinders
- for manual turning of the engine
- enables pinpoint positioning
- for adjustment work on valve clearance or engine repair
|
Article number: 51104 |
|
- for engines with 6 and 8 cylinders
- for manual turning of the engine
- enables pinpoint positioning
- for adjustment work on valve clearance or engine repair
|
Article number: 51105 |
|
- for engines with 5, 6 and 8 cylinders
- for manual turning of the engine
- enables pinpoint positioning
- for adjustment work on valve clearance or engine repair
|
Article number: 51106 |
|
- for engines with 6 cylinders
- for manual turning of the engine
- enables pinpoint positioning
- for adjustment work on valve clearance or engine repair
|
|
|
|
|
|
- for brake calliper bolting on commercial vehicle front axles and trailing axles
- due to the design of the spanner, it is not necessary to dismantle the track rod lever
- for tightening the bolts with a torque spanner according to the manufacturer's specifications
E18 / E20 suitable for: MAN TGL and TGM
E24 suitable for: MAN TGA, TGS and TGX MERCEDES-BENZ Atego 970-976 for vehicles with air suspension / brake caliper bolts on rear axle
|
|
|
- to set back the piston control when replacing brake pads or working on the caliper
- 12 mm hexagon drive, with magnet
- for SAF, Knorr and other manufacturers
|
Article number: 5043 |
|
- comprehensive set with pressure pump with manometer (0 – 2.5 bar), pressure hose and seven radiator test caps for many popular trucks
- for testing leak tightness in radiators and other cooling systems
- for testing correct functioning of the pressure-relief valve at the sealing of the radiator or expansion tank
- pressure loss control through manometer on pressure pump
|
Article number: 5492 |
|
- for quick and precise alignment and locking of the clutch plate
- for clutches with pilot bearing on vans and small trucks
- stepless adjustment of mandrels from ø 36-45 mm and ø 42-52 mm
- includes 4 adapters sleeves with ø 20, 25, 27 and 30 mm
|
|
|
- for loosening oil filters, fuel filters and compressed air dryer cartridges
|
Article number: 4253 |
|
- for oil filters
- also for air dryer cartriges on commercial vehicles
- left and right hand drive for both loosening and tightening
- extra long arms, 60 mm length, with anti-slip profile
- heavy-duty construction, weight 1360 gr.
|
Article number: 4716 |
|
|
Article number: 5004 |
|
|